News:

Main Menu

HU to amp connections

Started by ALUCARD19, January 08, 2015, 07:15:54 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

ALUCARD19

When going from the speaker outs on my HU KDC-X798 to my amp SS PN4.520D should I use the hi-input wires or is it better to use the RCA outs from the HU to the amp inputs
"A Hole is a Hole is a Hole",  Where Eagles Dare
         AMA Life Member #35524

Gannicus


Badgerbob


ALUCARD19

I was looking at the NVX XIX205 .5m twisted wire RCA interconnects is this brand any good.
100% Silver Tinned Oxygen-Free-Copper
Flexible PVC Insulation - Dual twisted construction for signal transfer that guards against noise interference (RFI)
Black nylon braid to prevent chaffing and electromagnetic interference
"A Hole is a Hole is a Hole",  Where Eagles Dare
         AMA Life Member #35524

AAWAV

Just rca. Do not spend a ton of money on the cables
'99 Fatboy & '13 SG (DECKED OUT) - Audio Fanatic

ALUCARD19

OK RCA cables it is.
Not to expensive $27.00 for 4 channel.
Thanks guys this should do it not to wait for my bike to get back from the shop.
"A Hole is a Hole is a Hole",  Where Eagles Dare
         AMA Life Member #35524