SS PN4.520D auto turn on

[ALUCARD19]

NUTZ,
Will the PN4.520D amp turn on automatically when using the RCA speaker plugs coming off of my Kenwood KDC X798 HU  4V out, or will I have to run the remote wire from the HU to get the amp to turn on.
I have everything in place just getting ready to hook up the power wires to the HU and amp.

[UltraNutZ]

All units connected via RCA inputs will need a REM wire

[ALUCARD19]

OK sounds good by tomorrow power will be complete then I just have to wait for the weather to get above 0 degrees.

[Bertk]

I used the purple wire from the Acc/Cigarette Lighter plug for power to the REM In.
[attach=1]

[ALUCARD19]

I'm using the blue/yellowstripe wire from my HU that says for remote amp power.
My HU is the Kenwood KDC X798

[UltraNutZ]

I'm using the blue/yellowstripe wire from my HU that says for remote amp power.
My HU is the Kenwood KDC X798

should be blue/white

blue/white is amp control
blue is power antenna control
light blue/yellow is steering wheel control

[ALUCARD19]

You're right Nutz it's dark in my garage, lights are not so bright. I'm going with what is on the factory tag wrapped around the wire.