New Fuel Moto E-Series 2/1 retrofit muffler for V&H Pro Pipe, D&D Fatcat, etc..

Started by Jamie Long, July 10, 2015, 07:41:46 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Jamie Long

The E-Series universal 2/1 muffler allows user to tailor the sound and performance of their current 2/1 system. This is a direct replacment muffler for many popular systems inluding the D&D Fatcat & Boarzilla, V&H Pro Pipe, and many others. The E-Series elliptical tuning system allows you to add or remove discs based on the performance requirements of what your motor requires and has been tested to over 175Hp. The E-Series muffler also gives you the ability to adjust to a specific sound level you are looking for. The kit includes E-Series muffler with FLH style mounts (23.5" w/ 2.5" inlet), pre-installed tuning discs, and stainless clamp. Optional components include E-Series rear heat shield, and stainless adjustable extension (allows muffler to be used in applications up to 28")

Significantly reduced dB level compared to straight through mufflers
Deep, powerful tone
Superior tunability and overall performance
Full tunable on stock to fully modified motors
Fits most FLH 2/1 systems such as D&D, Vance & Hines, etc.
NOTE: E-Series heat shield not required on most Vance & Hines Pro Pipe applications

http://www.fuelmotousa.com/i-22164513







joe_lyons

Powerhouse Cycle & Dyno - Performance is our passion 816-425-4901

Jamie Long

Quote from: joe_lyons on July 10, 2015, 11:17:09 AM
What about a later dyna propipe?

This muffler has the horizontal mounts, when our Dyna & Softail E-Series systems are finished we will be offering vertical universal mufflers as well.

Durwood




firefighter156

Sound clip would be sweet.. Does the bike in the Pic have the "optional" heat shield applied?
2020 Street Glide

itsafatboy

Hi do you have a estimate on when the muffler will be ava for the dyna type mount tabs ?

thanks
bobhouck@comcast.net

Jamie Long

Quote from: itsafatboy on November 05, 2015, 12:53:50 PM
Hi do you have a estimate on when the muffler will be ava for the dyna type mount tabs ?

thanks
bobhouck@comcast.net

No date currently on universal mufflers for the Dyna style exhausts, getting thru production on the Dyna 2/1 system and we'll look at universal applications when full systems are completed.

cherryseeg2

Jamie,are you typically seeing gains when switching to the e-series muffler over the zilla muffler?
2005 Cherry SEEG2-J&B Performance 120 163hp/144tq

Jamie Long

Quote from: cherryseeg2 on November 09, 2015, 10:23:24 AM
Jamie,are you typically seeing gains when switching to the e-series muffler over the zilla muffler?

That depends greatly on the application, comes down to specifically what the combination needs and giving the motor what it wants

qtrracer

Have you found when switching from a zilla muffler to this muffler that there is a big change in afr's?

Jamie Long

Quote from: qtrracer on April 29, 2016, 01:27:23 PM
Have you found when switching from a zilla muffler to this muffler that there is a big change in afr's?

There is no blanket statement as far as how much the tune will change, but rest assured its gonna change one way or another.  This will be greatly influenced by the specific combination.


-JC-1

04 FLHT-S&S 124-Baisley-640ez-xxx super g-IST-02-FXST 103 NRA Patron SAF Life