60ft Times (hints)

[RXBOB]

Would like to hear what people did/do to improve there 60ft times?
I am sure there is not one sure way but all ears on hearing peeps methods

[bladerunner]

  For me  a good tire  that hooks up , then manage the clutch with your left hand or in my case I adjusted springs and weights .

[pwmorris]

  For me  a good tire  that hooks up , then manage the clutch with your left hand or in my case I adjusted springs and weights .

Yup-
Easier with a lock up, once dialed in...let the LU do the work and save your friction plates from burning up...

BTW, how long you been going No-Bar on that bad boy?

[bladerunner]

  For me  a good tire  that hooks up , then manage the clutch with your left hand or in my case I adjusted springs and weights .

Yup-
Easier with a lock up, once dialed in...let the LU do the work and save your friction plates from burning up...

BTW, how long you been going No-Bar on that bad boy?

  Went to the track earlier this summer with the bar  up high  .  Videos showed  good launches no  front end lifting .  Last week was my 1st time with out the bar , made some chicken passes then let`er ripe   . Conditions were perfect


   to the OP forgive the high jack
   

[strokerjlk]

Would like to hear what people did/do to improve there 60ft times?
I am sure there is not one sure way but all ears on hearing peeps methods

The biggest thing is determine where your shifting at .
Are you shifting before the 60 ft , at 60 ft , or after 60 ft ?
You want to shift after the 60 ft beam

[RXBOB]

Would like to hear what people did/do to improve there 60ft times?
I am sure there is not one sure way but all ears on hearing peeps methods

The biggest thing is determine where your shifting at .
Are you shifting before the 60 ft , at 60 ft , or after 60 ft ?
You want to shift after the 60 ft beam

all right something to try cheers