Rockout Rocker Inserts

[Rockout Rocker Products]

Hey brother,

Thanks for your interest in my products. I replied to your email, just need some info.

John @ Rockout

[J F Go]

Did you ever get confirmation on your testing for the EVO 1340?  I sent you an email through your website as well, but I have  1996 Heritage Softail and wouldn't mind giving this a try.Thanks

    Ordered a set for my 110 motor as well and they arrived 3 days later. That's quick, I think. I also have a 96 Heritage and would like to know if they will work in the 1340 EVO. Thanks

[Rockout Rocker Products]

    Ordered a set for my 110 motor as well and they arrived 3 days later. That's quick, I think. I also have a 96 Heritage and would like to know if they will work in the 1340 EVO. Thanks

Thank you very much for purchasing my Rockout kit. I'll send you a PM about the Evo inserts in a few.

John @ Rockout

[J F Go]

    Ordered a set for my 110 motor as well and they arrived 3 days later. That's quick, I think. I also have a 96 Heritage and would like to know if they will work in the 1340 EVO. Thanks

Thank you very much for purchasing my Rockout kit. I'll send you a PM about the Evo inserts in a few.
I was unable to click on your link,but Id be up for that.
John @ Rockout

[Tsani]

I like the fit of the bolt after installation. Takes the slop out. I am putting these in the other holes as well.

[Rockout Rocker Products]

I like the fit of the bolt after installation. Takes the slop out. I am putting these in the other holes as well.

Thank you very much for purchasing my Rockout kit!

I don't see how putting them in every hole will do anything more to stop the ticking, but it will certainly align the support plate better.

 

[Rockout Rocker Products]

    Ordered a set for my 110 motor as well and they arrived 3 days later. That's quick, I think. I also have a 96 Heritage and would like to know if they will work in the 1340 EVO. Thanks

Thank you very much for purchasing my Rockout kit. I'll send you a PM about the Evo inserts in a few.
I was unable to click on your link,but Id be up for that.
John @ Rockout

JF, please PM me your name & shipping address.

Thanks, John @ Rockout.

[randyman]

I'm expecting mine in the mail tomorrow.  They are going in the front rocker box on my 2005 Road King that I have been chasing this weird noise for a couple years on.  If this don't stop it I'm done looking and will live with noise.  One of my bolts has the c shaped mark were shaft has been tapping on it but just the top mark like an O with the bottom missing.

[Ohio HD]

Do you know if these will work with Vulcan Engineering billet rocker supports for Twin Cam motors? I have a set of these supports on the way for a 124 build.


Sent from my iPhone using Tapatalk

[Rockout Rocker Products]

I'm expecting mine in the mail tomorrow.  They are going in the front rocker box on my 2005 Road King that I have been chasing this weird noise for a couple years on.  If this don't stop it I'm done looking and will live with noise.  One of my bolts has the c shaped mark were shaft has been tapping on it but just the top mark like an O with the bottom missing.

Thanks for choosing Rockouts for your ticking problem!

Please let us know how they work out for you.

John

[Rockout Rocker Products]

Do you know if these will work with Vulcan Engineering billet rocker supports for Twin Cam motors? I have a set of these supports on the way for a 124 build.

Sorry, I don't have any experience with those. When you get them, let me know the hole sizes & if the standard Rockouts won't fit, we'll come up with a version that will.

 

John

[randyman]

Installed them and noise still there product is very nice install was easy.  I am convinced that its just going to be noisy. Bike is a 2005 road king 95inch, SE 203 cams with upgraded tensioner conversion, short block Charlie Scotsman heads, SE adjustable push rods, S and S lifters, pro pipe, and thundermax tuner.  Bike runs very well.

[Rockout Rocker Products]

Hi Randy,

Sorry the inserts didn't solve your ticking problem. I'm curious... did your bolts have the typical "eyebrow" marks on them?

Thank you for trying my product, I hope you track down the source of the noise.

John @ Rockout.

[FSG]

Randy are there any witness marks on the PRs and have you opened up the tops of the tubes?

[randyman]

One bolt had a mark but just top of a circle mark.  I do believe your product is a worthy product and is well priced. I would recommend it to anybody to help noise.

[Ohio HD]

Do you know if these will work with Vulcan Engineering billet rocker supports for Twin Cam motors? I have a set of these supports on the way for a 124 build.

Sorry, I don't have any experience with those. When you get them, let me know the hole sizes & if the standard Rockouts won't fit, we'll come up with a version that will.

 

John

Here's the dimensions for the Vulcan Works rocker arm supports.


[attach=0]


[attach=1]

[Rockout Rocker Products]

Thanks for the pics. If you'll PM me your name & shipping address I'll send you a special set to try. I just ask that you keep the particulars between you & I for now, and post the results here whatever they are.



John

[Rockout Rocker Products]

JW113.... Got your PM, couldn't reply... your inbox is full.

John

[J F Go]

Finally got around to installing these in my 07 SERK and the ticking is gone. That ticking was so annoying and hearing the same old line "they all do that" was kinda tipping me over. Glad its gone. Thank you for taking the time to figure it out and the effort to correct it.

[Rockout Rocker Products]

Finally got around to installing these in my 07 SERK and the ticking is gone. That ticking was so annoying and hearing the same old line "they all do that" was kinda tipping me over. Glad its gone. Thank you for taking the time to figure it out and the effort to correct it.

Hey JF,

Thank you very much for your purchase & the feedback. I know just how you felt firing up the bike for the first time 

  It really makes my day when I hear stories like yours.

John @ Rockout

[2006FXDCI]

Got my rockouts installed today into my SE forged supports using S&S roller rockers and shafts . The rockouts installed easily , they can be installed upside down in the SE supports so make sure the small tapered end is down . Didn't need much force to seat them , i did it by hand . It will be a while until i get my motor together and running , i will report my final findings then . The Rockouts seem like a great product ! I cant wait to hear the difference !

Got around 100 miles on my new motor . 11.5 to 1 107" using woods 999-6 cams . I am absolutely amazed at how quiet my valvetrain is ! At idle all i can hear is reversion in my throttle body . My tuner was so freaked out at how quiet my valvetrain was that he called me and asked if i adjusted my push rods correctly ! Great product and finally no more tick tick tick 

[Rockout Rocker Products]

Thanks brother, both for the support & taking time to get back to me with your results.

Always great to see another addition to the tap free club! 

John @ Rockout

[TN]

Just wanted to chime in here and say that Rockout inserts cured an annoying tap I had in my almost bone stock 110".    I had witness marks on two bolts.


TN

[Rockout Rocker Products]

Just wanted to chime in here and say that Rockout inserts cured an annoying tap I had in my almost bone stock 110".    I had witness marks on two bolts.
TN

Thanks man, that's great to hear. Have a great weekend, & thanks again for your support 

John

[TN]

I wasn't sure about the right vendor I used but I am now.    My kit had five inserts and purchased thru amazon prime. I turned my local indy on to them and he purchased fifteen sets to start off with.

Again, such a simple solution for a specific tap tap.

Rock On


TN