May 09, 2024, 01:37:58 AM

News:

For advertising inquiries or help with registration or other issues, you may contact us by email at help@harleytechtalk.com

A 2 speaker fairing setup can really go loud and still have SQ

Started by ridingonair, May 05, 2016, 09:04:39 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages1
User actions

ridingonair

May 05, 2016, 09:04:39 PM

UltraNutZ

May 06, 2016, 05:19:52 AM #1
no more clipping after you replaced the ZED with the MOTO?

buying the right equipment usually results in the "right" outcome.  Congrats.. nice looking ride by the way.    :speaker:
Politicians are like diapers.
They need to be changed for the same reasons

ridingonair

May 06, 2016, 09:02:57 AM #2 Last Edit: May 06, 2016, 04:25:07 PM by ridingonair
Quote from: UltraNutZ on May 06, 2016, 05:19:52 AM
no more clipping after you replaced the ZED with the MOTO?

buying the right equipment usually results in the "right" outcome.  Congrats.. nice looking ride by the way.    :speaker:
NO. Still confused on the ZED though. Wasn't clipping at 1k test tone where gains were set. BUT I should have ran a 100hz tone to see if it was. Either way even unclipped it was being overdriven. It was at 31.6v rms. Wave was clean but it would have produced 277watts there. So in theory it was overdriven. If a had a clamp meter I could have checked current draw. I fused at 30 at it was rated for 25. Was told to fuse 30 by seller. I may have blown the 25 and the amp was just on the cusp of overcurrent for short bursts? I got no clue. Power is there now though.  :SM:
User actions
Print
Go Up Pages1