M8 107 and maybe 114 CCP

[CowboyTutt]

Anyone check them yet?  Heard one report, supposedly originating from Steve Cole at TTS himself, that CCP of the 107 M8 was @240. 

After looking at the negative overlap stock cam timing and the compression ratio, I could see how this might just be so. 

If someone has one to do a CCP test on, that would be interesting. 

Thanks and regards,

-Tutt 

[JamesButler]

Numbers seem enticing.  But will it retrofit into my FXR's?   

[rigidthumper]

Numbers seem enticing.  But will it retrofit into my FXR's?   

Yes, with proper application of Time, Effort and Cubic Dollar$.

[HV]

I just checked a 107  .......170 CCP 

[nastyn8g]

I just checked a 107  .......170 CCP 

Is this with the releases working? or disabled?

[HV]

Thats with them working...will check one later if I get a chance disabled

[rbabos]

Thats with them working...will check one later if I get a chance disabled

Like , who cares what it is with releases activated?
Ron

[FSG]

Thats with them working...will check one later if I get a chance disabled

Like , who cares what it is with releases activated?
Ron

I do      actually I want to know with and without 

[Durwood]

I haven't checked one but doing the math, they should come in around 200-205

[HV]

Actually with a dual plug you could see the running compression 

[rigidthumper]

Actually with a dual plug you could see the running compression 

That's gonna take a bigger gauge

[HV]

Disabled the releases on a 107 ...my Gauge Must be Bad or something .....180 PSI