Roller Rockers for M8

[BADSE]

Looking for Roller Rockers for M8 and No Luck ....anyone offering them yet?

[Ohio HD]

Haven't seen any, but not sure you will need them due to relevantly mild lifts that the four valve heads will see.

[rbabos]

Looking for Roller Rockers for M8 and No Luck ....anyone offering them yet?

Why would you need them? I see no purpose.
Ron

[BADSE]

Woods WM8 -9F60 Cam has a .600" Lift...

[1FSTRK]

With a proper 4 valve head there really is little reason or advantage to .600 lift on a street engine. You also really do not need a roller at .600 lift with reasonable spring pressures. There will be a learning curve for the HD performance guys when it comes to the 4 valve heads.

[PoorUB]

Woods WM8 -9F60 Cam has a .600" Lift...

Where is the point where additional lift adds no value? Seems to me that the diameter off the valve, or seat eventually is the restriction anyway. .600" lift? Seems to be at or over that point with the M8 valve sizes.

[HD/Wrench]

With a proper 4 valve head there really is little reason or advantage to .600 lift on a street engine. You also really do not need a roller at .600 lift with reasonable spring pressures. There will be a learning curve for the HD performance guys when it comes to the 4 valve heads.

very true, however there will be items made and sold just to sell parts, nothing more.. Not bashing on any company just stating what I feel to be factual..  Many times we have seen how the " better" item in fact does nothing more than what stock did, other than lighten your wallet.

[koko3052]

Doesn't a lighter wallet equate to more speed?

[sfmichael]

Doesn't a lighter wallet equate to more speed?

     ...it should