Barnet Clutch spring enough for 100+ trq?

[Fisherking]

 Will the Barnet heavy duty clutch spring going to be enough for a 100lbs trq engine ?

Thanks F.K.

[Ohio HD]

If the clutch is health, should hold it fine.

[joe_lyons]

Will the Barnet heavy duty clutch spring going to be enough for a 100lbs trq engine ?

Thanks F.K.

That spring is an absolute bear, I would suggest just getting an alto or Screaming Eagle Spring

[Fisherking]

I already have the spring ... Maybe it will improve my streanth in my left hand so it will equal my right ....

F.K.

[rockytop117]

Will the Barnet heavy duty clutch spring going to be enough for a 100lbs trq engine ?

Thanks F.K.

I ran it in a 107ci combo & in traffic it will create issues for you. Thats one stiff a$$ spring!

[Coff 06]

I'm running the SE spring with 123hp/118tq in my 98" Softail and its holding just fine,even on the Dyno.              Coff 06

[jmorton10]

I have that spring in my 124 with a Barnett extra plate clutch.  I also have an AIM 95 so the clutch pull is very easy (my hands are pretty arthritic at this point & I can still work it fine)

~John

[Fisherking]

I have that spring in my 124 with a Barnett extra plate clutch.  I also have an AIM 95 so the clutch pull is very easy (my hands are pretty arthritic at this point & I can still work it fine)

~John

AIM 95 ?? is that the easy pull clutch with diffrent ramps ?

F.K.

[jmorton10]

https://aim-tamachi.com/pages/variable-pressure-clutches-1

~John

[HD/Wrench]

Barnett spring is 505 ish put that in stock clutch put a AIM 84 on it and it will hold right at 155 tq

[Fisherking]

Nice add on but at $350 amarican that is like $500 canadian  . I might waite for next year lol.
F.K.