HarleyTechTalk

Specifically the rear 2 on the left side.  I did fair amount of cursing. Cam installed, making a little progress.

I made a little adapter to do mine. 1/2 x 1/8 x 4 steel, drilled a hole in the end and drove a piece of allen wrench in. Flush on the top, just enough sticking out on the bottom for the bolt recess. Then I put a square hole in the other end for the torque wrench.

You can use it like a wrench until it gets tight and then put it on the torque wrench.

Slot an old/worn/cheap socket and your good to go. What is shown in the pics can also be done with an allen ratchet.

[attach=0]

With 90 degrees between torque wrench and box end wrench or allen ratchet the torque has not to be corrected.
[attach=1]

[attachimg=3]