HarleyTechTalk

http://www.fullsac.com/cvo-muffler-cores.html


so they have 3 levels given.  Has anyone done the mid level (2.0) or high level (2.25)?

thanks.  I am starting my research and the 2010 RG comes with a 2/1 pipe

Check here www.cvoharley.com

I only had to change out my baffles on the 09SERG but installed the 2.25" baffles and like them, not nosiey at all but rather a nice rumble.  Doc

Quote from: Ohio Phil on August 26, 2009, 03:30:03 AM
Check here www.cvoharley.com

Can ya narrow that down a bit?

probably try the search forum.

I was hoping we would have a few that have done the Fullsac here.  Thanks Doc.

280389685096 on Ebay
This guy is under half the price of Fullsac. One guy I know is using these and loves them Quiet down the road and bark when pushed, no download or computer changes on an 09

I used the 2" fulsac cores in my stock mufflers on the 09 103 stage II street glide... Really nice tone, not real loud... Did notice that the sound changed a lot after tuning the bike.
jb

Here is a link to instructions for installing Fullsac baffles in CVO bagger mufflers.

http://www.cvoharley.com/smf/index.php?topic=28086.0

You need to register to see pics.

Quote from: NETacomaFatboy on August 26, 2009, 08:15:47 AM
probably try the search forum.

I was hoping we would have a few that have done the Fullsac here.  Thanks Doc.

Was hoping to tone down the Ultra a bit; found a new set of '09 SERG take-offs and removed the stock baffles.  Initially installed the 2" FullSacs; then finally settled on the 1.75s.

Very subtle tone with a nice rumble, but they'll still bark when you crank the throttle.  I think HERKO coined it as being "Quiet Power"! 

The FullSac conversion was a piece of cake!