1952 Oil Pump Chain Lube Screw Question

Started by JamLazyAss, June 26, 2024, 01:47:27 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages1
User actions

JamLazyAss

June 26, 2024, 01:47:27 PM Last Edit: June 26, 2024, 02:56:45 PM by JamLazyAss
Question I'd like to verify with you guys.
On my 52 Panhead, shouldn't this screw be seated (closed) all the way as I run a belt primary?





I'm not a proctologist, but I know an asshole when I see one...

xlfan

#1
June 27, 2024, 03:23:50 AM
IIRC, that screw is for the secondary chain lubing. I do believe the primary chain was lubed by a special crankcase bolt at about 2 o'clock on a 52.

JamLazyAss

#2
June 27, 2024, 12:00:21 PM
Quote from: xlfan on June 27, 2024, 03:23:50 AMIIRC, that screw is for the secondary chain lubing. I do believe the primary chain was lubed by a special crankcase bolt at about 2 o'clock on a 52.
Really?  :scratch:
I'm not a proctologist, but I know an asshole when I see one...

Ohio HD

#3
June 27, 2024, 12:19:39 PM
He's right, my '52 had that vent / oiler.

Breather tube/primary chain oiler by Colony



Print
Go Up Pages1
User actions