April 26, 2024, 04:06:09 PM

News:

Rear belt pulley???

Started by sandrooney, November 01, 2019, 05:00:20 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages1
User actions

sandrooney

November 01, 2019, 05:00:20 PM
Can you warp or bend a rear belt pulley?
Patience is such a waste of time .

Scotty

November 01, 2019, 06:30:42 PM #1
I have seen the inner ring come loose and make the pulley look warped.........just needed to be tack welded back on.

codyshop

November 01, 2019, 08:57:26 PM #2
Quote from: Scotty on November 01, 2019, 06:30:42 PM
I have seen the inner ring come loose and make the pulley look warped.........just needed to be tack welded back on.

I think the ring is steel and the pulley is cast aluminum, and it must be peined / center-punched back on.

barny7655

November 01, 2019, 10:41:56 PM #3
the answer is it will slightly bend, warp  before cracking ,its only alloy , if suspect replace
riding since 62, BSA bantum the first bike

sandrooney

November 02, 2019, 06:06:38 AM #4
 I just checked and mine is fine, I was just mostly curious. Thanks
Patience is such a waste of time .
User actions
Print
Go Up Pages1