Hillside 124 dual cam

[rob71458]

Hey, there is still snow on the ground. Go for it!!!

[Hillside Motorcycle]

Triple T,
Formula is;

1100 x 1/2 intake cam duration x .705
---------------------------------------
                rpm

1100 x 132.5 x .705          102753.75
--------------------    =    ------------   = 18.6825" from valve seat to the
        5500                            5500                         end of the air cleaner
                                                                            mounting surface.
"The constants for each pulse(3rd pulse formula shown)take into consideration the speed of sound, intake tract temperature, and the time the valve is open."
Scott

[NCTURBOS]

Scott/Trip-T,

Are the heads S&S castings or H-D castings?  Also, this is a "B" motor?!?!  Even more impressive!!

Thanks,

K.

[Hillside Motorcycle]

Scott/Trip-T,

Are the heads S&S castings or H-D castings?  Also, this is a "B" motor?!?!  Even more impressive!!

Thanks,

K.

Keith,
Yes a "B" engine, with S&S cylinder head castings.
Scott

[NCTURBOS]

Scott/Trip-T,

Are the heads S&S castings or H-D castings?  Also, this is a "B" motor?!?!  Even more impressive!!

Thanks,

K.

Keith,
Yes a "B" engine, with S&S cylinder head castings.
Scott

Thanks Scott...  I now have more faith in my S&S super-stock casting heads for future/bigger builds.

K.

[Hillside Motorcycle]

Triple T,
Should see those pieces here from HPI any day.
Scott

[aharp]

Scott/Trip-T,

Are the heads S&S castings or H-D castings?  Also, this is a "B" motor?!?!  Even more impressive!!

Thanks,
Those castings work really well. Have a set with 2.02 valves that we did going on a 117. They pull very well.

K.

Keith,
Yes a "B" engine, with S&S cylinder head castings.
Scott

Thanks Scott...  I now have more faith in my S&S super-stock casting heads for future/bigger builds.

K.

[TripleT]

Scott,

Are you informed about the injectors joe is working on? after my chat with him today it seems like a bore is possible to 65mm next winter? Any thougts? He continues to say this engine build is unbelievable!

[jack5hd]

i can't seem to find the dyno chart on this one.............has it been posted?

[Hillside Motorcycle]

Scott,

Are you informed about the injectors joe is working on? after my chat with him today it seems like a bore is possible to 65mm next winter? Any thougts? He continues to say this engine build is unbelievable!

T,
Yes, he did tell me what he has up his sleeve.
Scott

[TripleT]

Thanks Scott, we shall see if the injectors help? Jack5, still testing, I will post SAE uncorrected, STD, Actual when its all buttoned up, very close to that happening. Just tested a few different pipe selections, injectors, etc. This will be a screamer for sure

[partycrasher]

any updates.......

[jack5hd]

i am curious also............

[Hillside Motorcycle]

Triple T told us that he pegged the speedo in 3rd, on the test ride!!
Scott

[TripleT]

I will post all dyno runs this coming week, probably monday, first I have to go buy some depends after that ride I took yesterday, I'm still shacking after crapping my pants. By far the most powerful machine I have EVER rode, absolutely insane.

[TripleT]

I will be posting the results on the dyno portion of this site, hope everyone enjoys the numbers, there very strong..

[TripleT]

Results, after taking this beast for a twist last Weds all is can say is its absolutely insane..

[attachment removed after 60 days by system]

[Hillside Motorcycle]

Triple T,
You'll probably want to put those over in the dyno section.
Scott

[Hogman]

Results, after taking this beast for a twist last Weds all is can say is its absolutely insane..

I THINK I can Sum This All Up, and in ONE Word!!!!

W O W!!!!!!!!!!   

Results, after taking this beast for a twist last Weds all is can say is its absolutely insane..
124 SAE3.jpg (14.94 kB, 428x336 - viewed 12 times.)

124 STD4.jpg (46.39 kB, 422x336 - viewed 6 times.)

124 EEC2.jpg (15.19 kB, 430x336 - viewed 4 times.)

124 DIN1.jpg (14.86 kB, 423x336 - viewed 3 times.)

[TripleT]

Thanks Scott, I will do that. Appreciate the shout out Hogman..

[FXDRYDR]

HOLY-MOLY!!!!   

Absolutely fantastic numbers!  Hats off to everyone involved.  THat has got to be a hoot to twist! 

[NCTURBOS]

Hey Scott...  How do you think the S&S 675g would work in this build?  I think you should find out for us... 


K.

[Hillside Motorcycle]

Keith,
Set up a set of heads for a 124"er for an S&S employee(he has left S&S at this point) with the .675.
Never heard the results from that although.
Saw the .715 Red Shift be a rockin' cam in 124's as well.
3500 out is where that one lives large at.
Have another 124"/62mm/Wood 10F combo, comin' round the clubhouse turn now.
Scott

[rob71458]

Holy Cow!  I better start saving up for next winters upgrades! 

[pddredduece]

I would like a motor like that in my Deuce!