help with PC V

[hogmandon]

 06 RG with PCV and auto tune. I called Power Commander to find out what cylinder they call #1. They said it was the rear. I like to run the rear a little richer than the front. I am not talking about a lot 13.6r to 13.7 front.
After a trip to the smoke out and going down the track. I pulled the plugs when I got home and the front is richer than the rear. Just the opposite of what I would have thought. So now I am wondering what is #1 cylinder.

[Makdaddy]

I actually did the same thing when i had autotune
I had the cyl switched
My notes show Cyl 2 is the rear
But that was a while ago
Hope that helps
If you have them switched you will know as the bike will run bad after several auto tune sessions
For the record front cyl will run richer by nature on a big twin.

[Makdaddy]

I looked up my old e mails
Odd that Dyno would tell you something different from me
Thread below
Maybe contact they tech (Jerry) listed in the e mail,  hope this helps




From: Greg Metcalf Sr [mailto:g_metcalf@sbcglobal.net]
Sent: Monday, April 20, 2015 4:02 PM
To: hdtech@powercommander.com
Subject: Re: Powercommander Technical Support Inquiry

Thanks Jerry
I initially took the Autotune off of the bike before I e mailed you.

After going over the install , I realized I may have had the Rear cylinder on #1 of the autotune and not #2
Would that make a difference in the operation of the autotune?
Greg


Yes, it would be tuning the cylinder on the wrong AFR data.

Jerry S. Schoenauer
Powersports Technician

DynoLogo4C-EmailSignature
Toll Free: (800) 992-4993    Fax: (702) 399-1431   

TIP_QR-signature-125h-2
New Tutorial Videos now available on Dynojet's YouTube Channel
http://www.youtube.com/user/DynojetResearch

[remington007]

PC-V cyclinder number 1 is front. PC-USB number 1 is the rear.

[hogmandon]

Thanks to all, That is why it was pinging more, opposite of what I wanted I am sure I heard the teck guy right but have bad CRS