2009 throttle control

[Golfman]

My new FLHX's cableless throttle control is giving me problems. There is a significant "dead spot" when you first take off and you can move the throttle (after the slack has been taken up) about 4 or 5 degrees and "nothing" and then it you give it more throttle and it jumps forward. Its particular difficult when starting out and trying to make a slow sharp left hand turn because you feel the need for more throttle to stop from dropping it and then it will "jump" forward - almost as if the sensors are reading 5 degree throttle as zero.
What's the consenus
Golfman (Dave)

[Tre_11 FLHX]

Dave- Have the same problem on my 09 UC- It is almost like a delay- scared the crap out of me more than once.  Put about 2200 miles on her in a month-still gets me once in awhile.  Hope someone knows of fix.

[Valley]

If you have a super tuner you have this adjustment.
Throttle Progressivity:

Throttle  Progressivity is available for Electronic Throttle Control (ETC) vehicles only.
Throttle Progressivity is a variable that allows the individual to adjust how closely the throttle plate follows the twist grip.  You will be able to program progressive throttle opening with this feature.
The table column headings represent the twist grip position in percent.  The table row headings represent engine rpm.  The values in the table are the 'Progressivity' values in percent.
If you want the throttle plate to exactly follow the twist grip you would make the values under a particular column heading the same percentage as the column heading itself.  For example, under a column heading of '40% Twist Grip Position' the table values would be changed to 40 in each of the cells in that column.
If the tuner wants the throttle plate to 'lag' the twist grip to help eliminate engine 'bog', then the values in a twist grip column would start at a low value and progressively increase to the same value that is that column's header.

[Golfman]

Thanks for that comment about the Super Tuner. I was going to purchase a Power Commander because I am very familiar with how it works and how to change the maps. When I use the Power Commander for idle and full throotle will that do the same thing?

[Valley]

The 09 tour pc has not been released yet. It is a totally new unit and I don't know if it will be able to adjust the throttle Progressivity

[Tre_11 FLHX]

What about the TTS Mastertune- Is there a setting I can adjust?

[ViennaHog]

MasterTune and SuperSert have the same throttle adjustment table. PC does not have this capability. I played with the feature several times and it actually works very noticeably. The 2008 stock bikes need some getting used to and the taller gearing doesn't really help a smooth take off. 

[HDDOC]

Can not help you with the 09pc, But the 08 pc stoped that problem on my 08.  Doc

[tmsimmon]

Seems like a safety issue... I'd take it back to the dealer and register a complaint.
Or can you use a race tuner without affecting your warranty?

[Golfman]

ValleyRacing: Where are you guys located? I have been talking to Dustin at PC; and I guess the new unit will be out very shortly - within a week or two. I had neglected to ask him whether or not the new unit will correct for this problem.
Golfman (Dave)

[Valley]

I'm in the far south burbs of chicago,Beecher,IL. How about you?

[crazybastid83]

On the tbw bikes, you have to shut it off at the ignition switch not the kill switch. If you shut it off by the kill switch and accidentilly hit the throttle, it stores it in memory.

[Golfman]

Central Florida

[Coyote]

I was told, so I can't say I know for sure, that the 08's on were limited (by software) on throttle response to help with the crankshaft problems. From a programmers standpoint, it would make sense to limit the torque to hide a design deficiency in the mechanical design. Anyone else know more about this?

[fxrp]

> Seems like a safety issue... I'd take it back to the dealer . . . [/color]

I agree with that big time. If the tuners can adjust the "progressivity" (is that really a word?) then Digital Tech can. I'd make the dealer adjust it to my liking and document it so if it goes out of adjustment they can do it again under warranty.

Paul

[jsachs1]

Very interesting,cause this is a major complaint/problem,that seems to become way more prononunced when engine mods are introduced.Will check with Mastertune.
John

[axtell]

We have a 107ci FLHX (2009) that I just adjusted the blade position yesterday....I made the blade angle agree with the column heading as suggested.....Major inprovement!!!!!!!!!  I had been working on the fuel curves and the throttle lag would change with each upload....When I went back and looked @ each upload the throttle position setting were changing each time...don't know why but is something you want to look @ before you load a revised map....Ron

[Golfman]

GREAT COMMENTS HERE. I am going to print this out for the dealer who is doing my 1,000 mile on the 18th.

Axtell: What are you working with? Harley's Race Tuner, Power Commander, or - when you are making these adjustments. I was going to install the PC V when it is available, only because I am familiar with them and not sure I would know my way around thr Race Tuner. If I put a Race Tuner on it can I hook up my laptop and modify the maps, or do I need the dealer and his dyno?
Golfman (Dave)

[Moke]

Dave
           Don't put a PcIII on your new bike!!!!!! Get a HD super tuner.....You have  speed density with the Delphi system now.PCIII will bring you back in time to Alpha N. technology.....2001 and earlier for touring bikes.
                       You wouldn't buy a new plasma TV then cover up the picture with a sheet and just listen to the sound.Don't do the same thing to your new bike...

[axtell]

Golfman:  TTS....P.S. whats your handicap?

[FLTRI]

Dave
          Don't put a PcIII on your new bike!!!!!! Get a HD super tuner.....You have speed density with the Delphi system now.PCIII will bring you back in time to Alpha N. technology.....2001 and earlier for touring bikes.
                      You wouldn't buy a new plasma TV then cover up the picture with a sheet and just listen to the sound.Don't do the same thing to your new bike...

Whoa there. The PC doesn't change the way the EFI works at all, just increases and decreases the output from the ECM. Still speed density as the ECM is still calling the shots.
Note: The Delphi VE tables are based on TP vs rpm, just like the PC.

It will be interesting to see if the 09 PC will allow the throttle blade progressitivity to be altered.
Bob

PS -I would opt for the Matertune over the Super Tuner, for no other reason, Mastertune has great customer support and the SEST has none, unless of course, you are a dealer or hooked to one. Then all you will deal with is days to get answers.

[Golfman]

AXTEL:
My local dealer was just talking me into the TTS today versus the race Tuner. They have a sale this weekend so I will pick one up. I hope I can figure it out. My laptop has Windows XP with UBS ports  - is that good enough ??
I am my own handicap !!!!
Golfman (Dave)

[axtell]

I can't tell you if your computer has enough horsepower to work but I would guess your OK...get the needed cables when you buy the unit....I have good clubs and a bad swing

[FLTRI]

I can't tell you if your computer has enough horsepower to work but I would guess your OK...get the needed cables when you buy the unit....I have good clubs and a bad swing

Simply pick up the phone and call them (310-669-8101). They will help you with any questions and configuration issues you have.
Bob

[rigidthumper]

Slight lag is built in- the complaints of 08 high idle resulted in the software change. Seems the high idle was caused by a slight rotation of the twist grip at shut down/key off, and the system takes the average of the last few shut down positions to determine "0". Remember, the throttle blade is also the idle air control, so if what it believes is 0 is actually something else, then the whole thing is off, and it has a direct effect on the idle speed and off idle performance.  Because the throttle blade is the IAC, "0" TP is usually 3-6%, depending on temp. Try the TP reset procedure; run/stop in the run position, hand off the throttle, key on for 10 sec, off for 10 sec, X4.  If nothing changes, the system is running WNL.
HTH
Robin
my handicap is my face