HarleyTechTalk

Lookin' Good Ed, Thanks for the pics BTW, have you done anything to the bagger?

Post removed.

Removed.

Post removed.

Removed

 
I missed the pictures...

Back to your regular scheduled program.

I made this one years ago. Works great. Used it today.

I just found this one sold by Randy @ Hyperformance on E-Bay.
It will do pinion shaft run out, piston TDC check,  piston jet pop off pressure, inter connect leak down.
It lists for $110.00 and includes the dial indicator.
It looks like a nice multi-use piece to add to the tool box.
I'm going to buy some aluminum and try to machine one like this...I like a multi-use tool like this one.

[attach=0]

[attachment removed after 60 days by system]

^^^ Nice tool   

Quote from: No Cents on December 29, 2013, 05:41:33 AM
I just found this one sold by Randy @ Hyperformance on E-Bay.
It will do pinion shaft run out, piston TDC check,  piston jet pop off pressure, inter connect leak down.
It lists for $110.00 and includes the dial indicator.
It looks like a nice multi-use piece to add to the tool box.
I'm going to buy some aluminum and try to machine one like this...I like a multi-use tool like this one.

[attach=0]

What does the hose on the left side do?

Quote from: Billy on December 28, 2013, 08:18:44 PM
Back to your regular scheduled program.

I made this one years ago. Works great. Used it today.

I like it, simple and accurate. Nice little step on the inside fro those pesky proud pistons.

colder than a well diggers azz outside...so I fired up the torpedo heater out in the barn and starting making my multi use tool. I used my drill press as a milling machine with the cross wedge vise I have. I still need to drill and tap for a set screw to hold the caliper in place...but I like it so far.

[attach=0]



[attachment removed after 60 days by system]

Nice work Ray. 

QuoteI used my drill press as a milling machine with the cross wedge vise I have.

    it's surprising what can be done with the humble drill press.

Looks nice.

Good job Ray

 
thanks guys...here is the finished tool.

[attach=0]

[attachment removed after 60 days by system]

    put some dims on the pic and we'll put it in the Home made Tools Section. 

Nice touch with the stamper.

Quote from: hrdtail78 on January 05, 2014, 02:08:46 PM
Nice touch with the stamper.

I put that on there as a joke   

I thought someone might find it amusing.   

I like it.

Serial number #1 of #1 When And where do we place the order? 

King of cubes sells the one in the first photo, not the exact same gauge.

What are the plans for the air fitting?

Checking piston oilers.